PTFE Seals































 

PTFE Sheet - Virgin, Mechanical and Expanded grades

The perfect material for Food (FDA) applications. Chemical Compatibility 0-14 PH Good for Temperatures to 450F

 

Ameri-lon a new family of products using a new hybrid material, Ameri-lon is the result of years of experience in producing PTFE materials.  It is designed for a wide range of demanding industrial requirements including gasket and bearing applications.  Ameri-lon is filled PTFE, uniquely combining the properties of PTFE and Kevlar materials.  Kevlar enhances the physical properties of PTFE and results in a superior gasket material.  Ameri-lon shows less cold flow and greater sealing ability than other filled PTFE materials (PTFE) or Fluorocarbons.  It maintains the chemical attack resistance and the temperature range of PTFE.

Product equivalents to Gylon :  Ameri-lon 9810 = Gylon 3504 , Ameri-lon 9820 = Gylon 3510, Ameri-lon 9840 = Gylon 3500, Ameri-lon Expanded PTFE = Gylon 3450/3545, Amerilon PTFE = Gylon Chemrex 3570 *

* This is to be used as a general guide only.  All applications should be considered individually

 

Machined or molded PTFE parts 

From Virgin or Mechanical Grade for v-packings, mechanical seal wedges or a 1000 other applications. We can  make parts made from samples or prints.
PTFE sheet, rod and bar are kept in stock for immediate shipment

 

Joint Sealant

Ideal for all large equipment flanges.  Eliminates retorting, easy to remove, No pre cutting required, Low stress required to seal, Self adhesive backing makes it easy to install.

 

Valve stem packing  

Soft expanded PTFE, easy to install, chemically inert, will not age, FDA suitable, adds service life to old worn valves by conforming to pitted or worn surfaces.  Also available in the original virgin PTFE version.

 

Insertable PTFE Gaskets

Seal troublesome, corroded, pitted & steam-drawn flanges with these preformed gaskets.   100% P.T.F.E. preformed gaskets easily drop into your flange and seal it.  They are just as easy to remove after use.  Made to fit standard Ansi 150, 300, 400 and 600 lb. flanges in 1/2 through 12" sizes

 

PTFE Cut Gaskets

Virgin*     Mechanical Grade*      Expanded PTFE*
Gaskets cut from Virgin or mechanical grade material,  posses all of the great aspects of PTFE like chemical compatability and a 450-500F temperature range, but require torque to seal.  If that torque is not possible or if flange faces are worn or pitted,
Expanded PTFE , gaskets are the answer.

Full Face                   Ring Gaskets      
 
    
 

PTFE Bellows Expansion joints

Allow your chemical system to flex when it has to. Using PTFE ® expansion joints saves wear on your system and protects from pipe strain. Ideal when you have to deal with chemicals.




We provide Virgin and filled PTFE Rod, Tube and Bar stock.  Both in molded and extruded versions.

At American Seal & Packing we extrude a large range of standard size PTFE rod from 3/32" diameter to 5" diameter. We also have the capability to centerless grind intermediate sizes up to 2" diameter. Many of our sizes can be supplied in Virgin PTFE or with fills of glass, bronze, brass, carbon, graphite,  moly and a large range of colors.

Visit our Seal Web Sites:
Order On-Line: www.SealSales.Com

www.sealsales.com www.usseal.com www.americansealandpacking.com
www.gasketsales.com www.encapsulated.com www.ptfe-orings.com
www.gasketing.net www.sheet-gasketing.com www.o-ringsales.com
www.PTFEpacking.net www.aspseal.com www.ptfe-gaskets.net
www.ptfejointsealant.com

© 2015 American Seals & Packing. All Rights Reserved.    Phone : 714-361-1435    Fax :714-593-9701    Email : sales@americansealandpacking.com